Single Bowl and Vessel Sink fitting

You produce the measurements and we’ll produce the hand basin!

All single bowl basins are made on the potter’s wheel from a very high quality clay. Each piece is fired up to 1260oC making it extremely durable, as effectively it has been turned to stone (hence, stoneware). The vessel sinks will not chip easily and are as hardy as any other porcelain hand basin that you might buy. All single bowl basins have built-in waste pipes and overflows, and come with a choice of styles of chrome wastes and plugs, so all you need to do is slot them into position and connect them up with the plumbing.

The vessel basins that you can order online come in two sizes and styles. If you want a different size you will need to contact us direct.

Sunken

Sunken or recessed hand basins are inset into the work top -- see sample illustration right. Again we can make these to the size you want but the most common sizes are cloakroom or bathroom sized, as with the free standing basins. You choose the work surface of your choice and let us know the dimensions you want your sink to be. We produce the sink and once it is delivered the hole should be cut to size in the surface, and the inset hand basin connected up.

Sunken hand basins can come complete with beech tops with towel rails. These units are easily bolted into the wall. Please note that these currently only come in cloakroom size.



Free standing

Free standing hand basins sit on top of the work surface, almost like a bowl -- see sample illustration right. We can make these single bowl basins to the size you want, but the most common sizes are cloakroom sized hand basins (33cm diameter across the top with a 30cm diameter mount / stands 16cm high) or bathroom basins (37.5cm diameter across the top by 35cm diameter mount / stands 18.5cm high).

Please note: due to the nature of the firing process, although we can make wash sinks to size, this size cannot be guaranteed to be exact, which is why we always suggest that you cut the hole in your vanity unit or washstand after delivery.

Taps do not come with the hand basins, the taps in the pictures are for illustration purposes only.

Sunken Basin Free Standing Hand Basin
Sunken Basin
vessel sink Free standing Basin
Free Standing Basin

Please note: due to the nature of the firing process, although we can make wash sinks to size, this size cannot be guaranteed to be exact, which is why we always suggest that you cut the hole in your vanity unit or washstand after delivery.

Taps do not come with the hand basins, the taps in the pictures are for illustration purposes only.

Basin Waste Options

All our basins include an integrated overflow as standard. Our wastes are slotted and connect with the basin's integrated overflow to allow water running into the basin's overflow to run into the drain. If you would prefer a bowl without overflow, please contact us to discuss your requirements. Our standard waste options all have a chrome finish.

Clicker or Click-Clack Waste

This style is also known as "push button". It is operated by pushing the top of the waste down to either open or close. There is an internal spring mechanism. The plug part of the waste is a round dome which is removable for cleaning purposes.

Flip-Top or Swivel Waste

The flip-top waste provides a simple, minimalist solution whereby the plug part is rotated to open and close the waste. This type of waste does not provide a perfect seal and therefore should not be used where a basin full of water is often required.

Plug & Chain

A traditional style plug and chain waste option is available on request. The basin will be custom made to include a chainstay hole in the side which the chain connects to.

click clack waste
Click Clack Waste
flip top waste
Flip Top Waste
traditional plug and chain
Plug and Chain

Please note: waste images representative only

Please contact Lucy or David Rogers: +44 (0)1590 642979 or +44 (0)7881 658727